 |
| Quantity: | |
|---|---|
Dimension
Parameter
Specifications | Technique |
Display | Dual row 6 digit LED display 6 digits display |
Readability | 1/90000 |
Output linear | ＜ 0.002% |
Comprehensive accuracy | Better than 0.01% |
A / D conversion speed | ≤400 times / second |
Accept Sensitivity | -3.6 ~ +3.6 mV / V |
Input load | 1 ~ 8 350Ω sensors |
Temp. Effect on output | ≤10 ppm / ℃ |
Temp. Effect on zero balance (TKo) | ≤10 μ V / ℃ |
Power supply | 24 ± 5 VDC |
Excitation Voltage | 5 VDC |
Service Temperature Range | -20 ~ 70 ℃ |
Weight (G), approx | 0.5 Kg |
Power consumption | ≤10W |
Features and Applications
Used for the occasions where the force measurement signal needs to be converted into digital communication signal, standard analog output signal and simple control
Analog output signal can be selected 0 ~ 20mA, 4 ~ 20mA, 0 ~ 10 V, 1 ~ 5 V,
Digital communication interface can choose RS485 or RS232
Dual-row 6-bit LED digital tubes respectively display real-time measured value, peak value, output current value, and I / O status information
The controller has the function of judging the upper limit, middle limit and lower limit
I / O has 4 inputs and 6 outputs, and the function of input and output ports can be customized
It can output the drive controller through the host computer, and can partially replace the PLC
The controller power supply adopts DC 24 V power supply, with a pressure width of ± 5V, which is more safe and stable
Open-hole panel installation, panel area is only 110mm (width) x 62mm (height)
Download 
T093 .pdf
